QuikGrip

QuikGrip Metal2Wood ClipScrews are the ideal choice to attach standing-seam roof clips to plywood,
OSB, or wood purlins. The unique head style configuration allows Metal2Wood ClipScrews to provide
the superior performance you’ve come to expectfrom Marco-quality products.

QuikGrip Metal2Wood ClipScrews

QuikGrip Metal2Wood Specs
.

Size	Head	Carton Qty	Weight/M
10 x 1"	#2 Phillips Square Pancake	5000	6.776 lbs
10 x 1-1/2"	#2 Phillips Square Pancake	2500	9.268 lbs

All fasteners listed are available in the U.S. Also available in Canada

Point Diameter	Major Diameter	Minor Diameter	Head Diameter
28 Type 17	.194 / .188	.133 / .126	.423 / .447
28 Type 17	.2140 LBS	56 IN-LBS	1545 LBS

Pull Out Strength (LBS ULT)
Substrates
	PLYWOOD			OSB	SOUTHERN PINE		SPRUCE PINE FIR		OAK	HEMLOCK FIR
	3/4"	5/8"	1/2"	7/16"	1"	1-1/2"	1"	1-1/2"	1"	1"	1-1/2"

	838	428	373	257	658	941	579	921	–	767	928

Pull Over Strength (LBS ULT)
Material
Designation	AZ55 Galvalume

Nom. Gauge	29	26	24	22
Thickness	.015	.019	.024	.032
ClipScrew	379	630	723	1806

QuikDrill

Marco QuikDrill screws are designed to attach standing seam roof clips to steel purlins or frames. The
special low-profile design features panake heads and a deep thread that pulls the fastener tighter
and resists pullouts better. As a result, you won’t get the dimpled roof panels and loose panel
problems typically cased by regular profiles heads that don’t fasten tight.

QuikDrill Metal2Wood ClipScrews

QuikDrill Metal2Wood ClipScrews
.

Size	Head	Carton Qty	Weight/M
10 x 1-1/8""	#2 Phillips Square Pancake	5000	6.776 lbs

Point Diameter	Drill Point	Major Diameter	Minor Diameter	Head Diameter
#10	3	.194 / .188	.133 / .126	.447 / .423

Point Diameter	Nominal Tensile	Minimum Torsional	Nominal Shear
#10	1825 LBS	56 LBS	1535 LBS</td

Pull Over Strength (LBS ULT)
Material
Designation	HRS Primed Only

Nom. Gauge	12	14	16
Thickness	.105	.075	.060
ClipScrew	1782	1072	782

ULTRALO

The UltraLo addresses common installation problems such as dimpling and canning. Our low-profile head design fits most panel recesses, and when used with Marco M-Clips delivers a trouble-free installation. Marco QuickGrip UltraLo screws feature a special deep thread that pulls the fastener tighter and resists pullout better.

UltraLo Metal2Wood ClipScrews

UltraLo Metal2Wood ClipScrews
.

Size	Head	Carton Qty	Weight/M
10 x 1-1/8"	#2 Phillips Square Pancake	5000	6.776 lbs
10 x 2"	#2 Phillips Square Pancake	2500	9.268 lbs

All fasteners listed are available in the U.S. Also available in Canada

Point Diameter	Major Diameter	Minor Diameter	Head Diameter
35˚ Sharp	.197 / .205	.128 / .136	.423 / .443
35˚ Sharp	.1612 LBS	61 IN-LBS	1272 LBS

Pull Out Strength (LBS ULT)
Substrates
	PLYWOOD			OSB	SOUTHERN PINE		SPRUCE PINE FIR		OAK	HEMLOCK FIR
	3/4"	5/8"	1/2"	7/16"	1"	1-1/2"	1"	1-1/2"	1"	1"	1-1/2"

	740	388	401	252	765	1269	583	1039	–	739	1170

Pull Over Strength (LBS ULT)
Material
Designation	AZ55 Galvalume

Nom. Gauge	29	26	24	22
Thickness	.015	.019	.024	.032
ClipScrew	626	-	-	-

Installation Tip

Always choose the appropriate fastener for the thickness and type of material to be drilled for any given application. To ensure optimum fastening performance, a 1900 to 2500 RPM screw gun rated 6 amps or more and fitted with a properly adjusted depth-locating nosepiece should be used. Sufficient pressure must be applied while screw gun is perpendicular to the working area. Overdriving fasteners can lead to leaks and other problems.

A lobe socket grips the fastener on 6 sides to prevent paint chipping, which leads to rust. The nosepiece of the drill needs to be set to the correct height for proper washer installation.