Weather-Tite PythonPro 4ft Stick

When it comes to ridge ventilation, the PythonPro® 4 Ft. Ridge Vent delivers reliable performance with easy installation and long-term durability. Designed to promote continuous airflow along the roof peak, it helps reduce heat buildup, extend roof deck life, and lower utility costs—while maintaining a clean, streamlined roofline. Built for professional installers, this vent integrates seamlessly under ridge cap shingles and is engineered to meet the ventilation demands of modern roofing systems.

Benefits

Leak-Free Protection – Its seamless design helps prevent roof leaks and water intrusion, protecting the home from moisture damage.
Dual-Purpose Venting – Designed to vent both bathroom fans and dryers through the roof, reducing the need for multiple roof penetrations.
Improved Airflow – Helps efficiently remove moisture, heat, lint, and odors from the home.
Built-In Flapper – The flapper helps prevent backdrafts, outside air intrusion, pests, and debris from entering the vent system.
Installation Flexibility – Available with or without an attached collar to fit different installation needs and duct connections.
Cleaner Roof Appearance – The low-profile, seamless construction provides a more finished and professional look on the roof.
Durability – Made to withstand outdoor weather conditions while maintaining reliable performance over time.
Reduced Moisture Problems – Properly exhausting bathroom humidity can help reduce mold, mildew, and condensation buildup inside the home.

VIEW SPECS

Net Free Vent Area: 18 sq. in. NFVA per lineal ft

Dimensions: 14” Width x 48” Length

Roof Pitch: Conforms to any pitch from 3/12 to 16/12

Color: Black

Nails: Bag of thirty 3” nails included

Pack Unit: 10 pieces per carton

Installer Features: Pre-marked shingle nail lines for fast, accurate installation

Approvals: FBC FL38704, TDI RV-125

Step 1

Remove ridge cap shingles from the entire length of the ridge. NOTE: Skip step 1 for new construction.

Step 2

Snap chalk line on both sides of the ridges and no more than ¾” from the peak.

Step 3

Cut along both chalk lines. Remove roof sheathing. NOTE: Slots should not be cut any closer than within 12” of the gable end, hip, or intersecting ridge.

Step 4

It is recommended that the vent be installed the entire length of the ridge to ensure blending with the roof line. Position the first piece at one end of the ridge. Using 3” nails, for ¾” roof penetration or penetration through the deck, whichever is less, anchor vent through preformed nail holes.

Step 5

Nail each additional section in the same manner until the entire ridge is covered. A chalk line may be utilized to ensure vent alignment. Cut the last piece to length and install with original uncut end to the outside.

Step 6

Install a new ridge cap using 3” roofing nails, for ¾” deck penetration or penetration through the deck, whichever is less. Nai the ridge caps through the vent along the nail line to secure the vent. Shingle may need to be trimmed.

Step 7

Ridge-to-ridge application requires a mitre-cut to maintain continuous ridge line appearance.

IMPORTANT INSTALLATION NOTES:

Python Pro Ridge Vent must always be installed with soffit vents of equal or slightly greater area.
When installing Python Pro Ridge Vents, all other vent openings (except soffits) should be closed off.
The slot cut in the roof ridge should only be cut no closer than 12” from any junction point, such as intersecting roofing ridge, chimney, gable, or other obstruction.
Install the vent over the entire length of the ridge.
Do not overdrive fasteners.

ADDITIONAL RESOURCES

VENTILATION CALCULATOR

Calculate the exact amount of ventilation needed for a well-balanced system.

TECHNICAL TOOLS

Dive deep into product sheets, diagrams, and full spec breakdowns.

Roofing FAQ

Learn everything you need to know about ventilation.

Weather-Tite PythonPro 4ft Stick

Benefits

VIEW SPECS